Comprehensive Guide for Router Setup

 

In order to raise data packets linking computer networks, routers are very much useful. Basically, a router is a networking device that transmits data packets within the computer networks. Moreover, they also satisfy the traffic leveling purposes. It mainly focuses on connecting networks together and maintains the broadcast traffic under control. However, when you upgrade to a faster router, then do not remove your old one. As it will be much helpful to extend your Wifi setup. So, we are going to mention you the entire process on how to Setup WiFi Extender.

Follow the whole guide and get effective steps in this article helping you making good use of your old router.

  Hacks On “How To Setup WiFi Extender?”

 

Here we are going to mention you with 2 useful steps that will effectively help you to have Setup WiFi Extender easily. So, follow the whole process and have extra facilities.

  Method 1: With Stock Firmware, Turn The Router Into Repeater

 

Before starting up with the process, you must ensure that you are having the facility inbuilt. After verifying, follow the following steps:

1. Firstly, have a notice on both the new and old router's MAC address. This is very essential for creating a bridge. Now directly move on to the old router and connect to the admin page.

2. If prompted, type in the admin username and password. Also, on the router's admin page locate the repeater settings. If necessary change the default settings.

3. You will find that the router automatically enters to access point mode. So in such a case, you need to change the mode to Wireless Repeater.

4. Once the Wireless Repeater mode is turned on, then you will have to enter the MAC address of the new router. In case, you are creating a bridge, repeat all the steps on your new router.

Method 2: With Custom Firmware, Turn The Router Into Repeater

 

If the above process makes any trouble, then you can proceed on with the custom firmware. In order to proceed, you must check the DD-WRT router database. Then, follow the following steps:

 

• Firstly on the router, you have installed the custom firmware. Also, remember you need to have a compatible version so that it does not create any problem.

• Having a proper custom firmware directly load up to the admin page. Now, locate the Wireless Mode drop-down menu by selecting the basic settings if necessary.

• As on the primary router, change the Wireless Network Name or the SSID name and save the changes.

• At the bottom of the page, you will find the Virtual Interfaces section. Here enter a new and different SSID and save it.

• You will find two interfaces namely the hardware and the virtual interface. Navigate and scroll down to the Network Setup section and change the local IP address.

• Now simply uncheck all the boxes and remove the SPI firewall. Apply all the changes and save the settings. Once the rebooting process finishes off, you will start enjoying the benefits of repeated signals.

Hope the article was helpful enough to resolve the issue that you might face while having a Setup WiFi Extender. We recommend you not to try anything else. If you face any difficulty, then get in touch with us and submit your query instantly.